THIXO 1100

THIXO 1100

"HYBRID INDUSTRIAL GRADE EPOXY GROUT"

Thixo 1100 is the three compenent Epoxy tile grout which is made by using hybrid Technology.

Thixo 1100 is specially made for bathroom and wash room area where an Acid Proof and high water resistance is required.

Thixo 1100 can be used for fill all kind of joints between 1mm - 15mm.

Unlike other Epoxy grout in market thixo 1100 having hybrid Technology which will allow the chemical to posses both epoxy benefit along with flexibility and self leveling nature which will ensure tight bonding and highest result then any other epoxy tile grout.

Areas of Application

  • Bathrooms
  • Rest Rooms
  • Washing places
  • Swimming pool
  • Any joints 1-15mm
  • Any cracks 1-15mm
thixochem
thixochem

Features & Benefits

  • Cold curing, cures to a tough, rigid and abrasion resistant
  • Highly Resistance to acid and chamicals
  • Bonds strongly on cement concrete, asbestos, mild steel, cement plaster applied surfaces.
  • Thermal stability – Irreversible chemical cure eliminates melting and flow at high temperature.
  • High abrasion resistant - Cures to give a permanently resistant for water over a wide range of temperatures
  • High chemical resistance – Excellent protection against corrosive soil conditions, resistance against saline water, acids and alkalis, high sulphate resistance

Method of Application in Waterproofing

Surface preparation :

  • Surface should be clean, dry and free of any lataince, grease, oil, dirt and other loose materials.
  • Concrete surface should have a light steel-trowel followed by a fine hairbroom or equivalent finish which is dry and free of dust, oil and other contaminants. All protrusions to be removed to level the surface.
  • Algae and fungi must be removed physically. After treatment leave for 2-3 hrs and then wash down thoroughly with clean water and allow drying completely.
  • Clean the remains of paint, rust and other contaminants before coating the metal surface.

As a Waterproofing Coating :

  • THIXO 1100 can be applied by spatula cant be applied by brush or roller.
  • In critical applications where thickness is paramount and desired than the stated one then two coats should be applied with quantities per coat gauged to give the specified final thickness.
  • On a vertical surface if high build up is desirable then additional coat may be required.
  • If a water ponding test is to be run, the membrane should be fully cured

Technical Data

Precautions & Limitations:

Surface to be dry for application as the material is cured in presence of moisture. Moisture level shall not be essentially more than 0.7%. Soft settling is likely to be observed in containers and the same shall be stirred thoroughly and carefully to achieve a homogeneous consistency. Avoid application on very hot substrate & during very hot and windy conditions. Film formation may not be uniform and gradual under such circumstances & skinning on top surface may lead to formation of blisters and bubbles due to entrapped vapor from within the material. Recoat Can be applied after touch dry and duration will vary depends upon the weather. THIXO 1100 must be cured for a minimum of 4 hours @ 27℃ before placing protection. Where damage to the membrane is possible (by traffic, backfilling, etc) it should be protected by a cementations screed or protection boards. A dust coat of cement should be used to prevent adhesion of the membrane to the boards. A bond with the topping is not required; a separator sheet

Technical Information Properties Results

Appearance Terra Cotta White and Grey

Tack Free Time @28℃ 4 hours

Time to Full Cure @28℃ 12 hours

Solid Content, % 85% ± 2

Customer Care :

ThixoChem
An der Spandauer Brücke 11, 10178 ,
Hackescher Markt,
Berlin, Germany

Email: customercare@thixochem.com.de | exportsales@thixochem.com.de