THIXO 91 TAR COAT

THIXO 91 Tar Coat

"FLEXIBLE TWO COMPONENT WATER BASED TAR "

THIXO 91 TAR COAT is the two component high quality water based liquid tar with composition of Liquid Tar with dual water resistant technology which can be added with any cement and can apply in Swimming Pool, Sewage Tank and sunken portion and also can be used as a effective water proof coating system, THIXO 91 TAR COAT is composed of specially developed Tar and polymers, properly selected and graded fillers. It cures by sunlight and good air circulation and will give a tough flexible membrane. THIXO 91 TAR COAT has excellent flexibility and bonding with concrete, water resistance, crack bridging properties; weathering durability Thixo 91 Tar coat will give immense bonding strength and will give superior leak proof.

Areas of Application

  • Open Terrace, any Open Surfaces
  • Foundations, basements & lift pits
  • Terrace Gardens
  • Sunk portion of bathrooms, toilets, balconies, etc.
  • Car Decks, Podiums
  • Any concrete and cement based surface to ensure leak proof
thixochem
thixochem

Features & Benefits

  • After curing will become thin, tough, flexible and abrasion resistant coating
  • Highly Resistance to contaminated water hence suitable for sewage tanks.
  • Bonds strongly on cement concrete, asbestos, mild steel, cement plaster applied surfaces.

Method of Application in Waterproofing

Surface preparation :

  • Surface should be clean, dry and free of any dust, grease, oil, and other loose materials.
  • Concrete surface should have a light steel-trowel followed by a fine hair broom or equivalent finish which is dry and free of dust, oil and other contaminants. All protrusions to be removed to level the surface.
  • Algae and fungi must be removed physically. After treatment leave for 2-3 hrs and then wash down thoroughly with clean water and allow drying completely.
  • Clean the remains loose particles and other contaminants before coating the metal surface.

As a Waterproofing Coating :

  • THIXO 91 TAR COAT should be applied by Brush/trowel in two coats maintaining the spreading rate to achieve the desired thickness.
  • In critical applications where film thickness is paramount and desired than the stated one then two coats should be applied with quantities per coat gauged to give the specified final film thickness.
  • If a water ponding test is to be done, then the membrane should be fully cured

Technical Data

Precautions & Limitations:

Film formation may not be uniform and gradual under such circumstances & skinning on top surface may lead to formation of blisters and bubbles due to entrapped vapor from within the material. Recoat Can be applied after touch dry and duration will vary depends upon the weather. THIXO 91 TAR COAT must be cured for a minimum of 4 hours @ 25℃ before applying top coat Where damage to the membrane is possible (By Traffic, backfilling, etc) it should be protected by a cementations screed or protection boards. A dust coat of cement should be used to prevent adhesion of the membrane to the surface A bond with the topping is not required;

Technical Information Properties Results

Appearance Black

Tack Free Time @20℃ 4 hours

Time to Full Cure @28℃ 6 hours

Solid Content, % 90± 2

Customer Care :

ThixoChem
An der Spandauer Brücke 11, 10178 ,
Hackescher Markt,
Berlin, Germany

Website: www.thixochem.com.de

Email: customercare@thixochem.com.de | exportsales@thixochem.com.de