THIXO 81

THIXO 81

“EFFLORESCENCE RESISTANT PENETRABLE SEAL COAT”0

THIXO 81 is the single component Polyurethane based premium quality penetrable waterproofing seal coat cum primer this can be applied in Terrace, water tank, sunken and also can be used as a effective Primer for any water proofing coating system which including water based polyurethane coating . Thixo 81 is composed of specially developed polymers, properly selected and graded fillers. It cures by air circulation and will give a tough PENETRABLE coating.

Thixo 81 has excellent efflorescence resistance and bonding with any surface except metal and glasses and has breathing properties, water resistance, crack bridging properties, weathering durability. Due to this low molecular weight this can be easily penetrated in to any concrete surface then will give immense bonding strength and superior water proof effect.

Areas of Application

  • On any Concrete slab like Terrace, Sunken, Water Tank, swimming Pool, etc...
  • Can be used as a efflorescence resistance coating.
  • Can be used as a SEAL COAT OR PREMIUM WATER PROOFING PRIMER.
  • Can be used as water proofing cum primer in Open Terrace, exterior wall before painting.
  • Wherever need Premium water proofing with heavy durability.
thixochem
thixochem

Features

  • Will Provide Tough, penetrable waterproof membrane.
  • Allows trapped vapor to escape thus preventing peeling and blistering.
  • Can be applied in uniform thickness to horizontal and vertical surfaces.
  • Develops excellent bond to most building materials.
  • Thixo 81 is highly durable in continuous wet condition.
  • Thixo 81 is non-flammable and does not give off toxic gases, when exposed to fire,
  • Thixo 81 is not harmful to the health of workman.

METHOD OF APPLICATION WATER PROOFING COATING:

SURFACE PREPARATION

  • Prior to application of THIXO 81 the surface must be prepared as mentioned below to avoid failure and to achieve maximum beneficial properties.
  • When placing THIXO 81 water should be removed so that surface is only damp. In no case there should be standing water.
  • The surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and THIXO 81.
  • New flat surface like sub-base concrete shall be made reasonably smooth so as not to impede the application of THIXO 81 and to avoid sharp projections.
  • All concrete surfaces shall be thoroughly pre-wetted prior to the application of THIXO 81 by pouring water on flat surface or by spraying water on vertical/inclined surfaces.

APPLICATION & COVERAGE:

  • THIXO 81 must be mixed with water and applied in the ratio of 1:1 by weight.
  • Coverage depends upon the surface i.e. 5-7 SQM in smooth flat surface
  • The mix has to be stirred thoroughly then Wait for 1-2 minutes to release entrapped air bubbles.
  • The mix has to be applied by specially made spray.
  • It should be allowed to air dry for 2-3 hours prior to apply subsequent coat.

STORAGE:

  • Store in dry cool place in the temperature range from 5⁰C to 30⁰C in sealed condition.
  • Do not allow to freeze. Keep away from direct sunlight.

PACKAGING:

20KG

Technical Data

PARAMETERS TEST VALUE METHOD
Appearance White Visual
Elongation 110% ASTMD 412902
Crack Bridging 0.3mm ASTM C 836:1995
Solid Content 60+-2 IS STD TEST
Abrasion /Hardness High ASTMD240:2002
Adhesive Strength 7.6 MPA IS 516
Algae & Fungus Resistant High ( No Growth) (ss 345:1998)
Recoating Time, at 27ᴼC, 65% RH, HOURS 02-03 hours
Full Cure 1 DAYS
Consistency 1: 1 Dilutable with water
Volatile organic Matter (VOC) %, (w/w) <0.8 %

IMPORTANT NOTE:

All BULWARK CHEMICALS and its products are sold in the market after strict Quality Control in line of ISO 9001 and guaranteed against any manufacturing defect. Although the basic formulation of Company’s products generally remains unchanged, production refinements arising from continuing research and evaluation program may occasionally result in marginal changes in properties. Bulwark aspires to ensure that any recommendation, advice, test data, specification, method statement and other information given in this product datasheet is accurate and best of company’s knowledge. Since, the company (bulwark cool coats and chemicals) has no control over the selection of its product, applicators, application methodology, how and where it is applied, therefore, the company cannot accept any liability directly or indirectly arising from the use of its product. It is important to any customer; user or specifier satisfies him / herself that the product is suitable for the intended purpose including health, safety and environmental aspect. Unless or otherwise agreed in writing, all products of the company are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. All customers, users, specifers should ensure that they examine the suitability of the product with company’s latest product data sheet.

Customer Care :

ThixoChem
An der Spandauer Brücke 11, 10178 ,
Hackescher Markt,
Berlin, Germany

Website: www.thixochem.com.de

Email: customercare@thixochem.com.de | exportsales@thixochem.com.de