THIXO 91

THIXO 91

“TWO COMPONENT POLYURETHANE COATING”

THIXO 91 is two component, water Based POLYURETHANE COATING which consists of specially developed polyurethane and properly selected components. THIXO 91 is not a usual Polyurethane coating it is modified Polyurethane which cures by mixing with curing component and gives Tough heavy duty Waterproof Membrane with extreme resistance for water and UV rays hence this can be applied on any Open Surface including Terrace and wall.

THIXO 91 also has excellent resistance to Corrosion with high bonding strength hence this can be used as an Anti corrosion coating on GI sheets.

AREA OF APPLICATION:

  • Wherever need waterproofing with high durability and High UV Resistance.
  • Open Terrace
  • Any Open Surfaces
  • On Metal Roof
  • Exterior Side Walls
thixochem
thixochem

Features

  • Will Provide Tough, Heavy Duty, Highly flexible water proof membrane.
  • Allows trapped vapor to escape thus preventing peeling and blistering.
  • Can be applied in uniform thickness to horizontal and vertical surfaces.
  • Develops excellent bond to most building materials.
  • THIXO 91 is not affected by ultraviolet light or by mild chemicals.
  • THIXO 91 is non-flammable and does not give off toxic gases.
  • THIXO 91 is not harmful to the health of workman.

METHOD OF APPLICATION WATER PROOFING COATING:

SURFACE PREPARATION

  • Prior to application of THIXO 91 the surface must be prepared as mentioned below to avoid failure and to achieve maximum beneficial properties.
  • When placing THIXO 91 coating, water should be removed.
  • The surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bonding.

APPLICATION:

  • After surface preparation like Removing loose particles and crack Treatment THIXO 91 must be applied on the Top of suitable primer.
    (Example: THIXO 81 or 2 Part Water: 1 Part THIXO 91).
  • Two coats are recommended on top of primer i.e. Thixo 81.
  • Thixo 91 Part A must be applied by mixing with Part B in the ratio of 20 : 1
  • First coat should be allowed to air dry for 2-3 hours prior to apply subsequent coat.

PRECAUTIONS:

  • THIXO 91 must be applied with temperature above 10⁰ C and below 40⁰ C.
  • THIXO 91 should not be used with addition of cement.
  • THIXO 91 is not harm for applicators and users.

STORAGE:

  • Store in dry cool place in the temperature range from 5⁰C to 30⁰C in sealed condition.
  • Do not allow to freeze. Keep away from direct sunlight.

AVAILABLE COLOUR:

  • white , Terra cotta

PACKAGING:

Part A- 20kg, 23kg, 25kg, / Part B – 1kg, 10kg, 20kg

Technical Data:

PARAMETERS TEST VALUE METHOD
Appearance White,Terra cotta Visual
Density 1.36+/- 2 ASTMD 412902
Solid Content 66% +/-2 ASTM D2369
Abrasion /Hardness 78 Shore A ASTM D 2240
Tensile Strength 2.1 MPA ASDM D 412
Adhesion Strength 2.6 MPA ASTM D4541
Algae & Fungus Resistant High ( No Growth) (SS 345:1998))
Recoating Time, at 27ᴼC, 65% RH, HOURS 02-05 hours Practical
Solar Reflectance Index( White Colour) 112 ASTM E1980
Elongation 380% ( Airless Spray Application) ASTM D412
Crack Bridging Ability 2.2mm ASTM C836
Tack free Time 1 hour Manual /Visual
Full Cure 24hours Practical
Dry Film Thickness 0.5-0.8mm ASTM D4138

COVERING CAPACITY:

  • THIXO 91 will give following coverage in below mentioned surface
  • Coverage will vary based on surface, Application type and workmanship.
  • Diluting more than 10% may give more coverage but definitely affect the quality.
TYPE OF APPLICATION COVERAGE/KG
ELECTRIC AIRLESS SPRAY 2.2-2.4 S.QM FOR TWO COATS

SHELF LIFE & STORAGE:

  • SHELF LIFE IS 12 MONTHS FROM THE DATE OF MANUFECTURING.
  • POT LIFE 2-6 HOURS
  • DO NOT USE IF COLOUR CHANGED FROM WHITE TO BLACK

Customer Care :

ThixoChem
An der Spandauer Brücke 11, 10178 ,
Hackescher Markt,
Berlin, Germany

Website: www.thixochem.com.de

Email: customercare@thixochem.com.de | exportsales@thixochem.com.de